Click To Call(352) 820-4633Click To Get A Free Estimate
Cottage with gingerbread trim, white and pink azaleas and a red brick paver drive in front of it

A sealer matched to Mount Dora brick pavers

Brick Paver Sealing in Mount Dora, FL

Ask for a free brick paver sealing estimate in Mount Dora, or call (352) 820-4633 now.

  • Brings out deeper paver color
  • Fresh joint sand helps lock pavers in place
  • Gives weeds less room to grow
  • Makes the surface easier to keep clean
  • Free estimate, no obligation

Request a Free Estimate

Free, no obligation.

Step 1 of 2

Where are your pavers?

Please choose one.

Free EstimateNo obligation
Fast ReplyWithin 1 business day, usually much sooner
Typical Local Price$1.50 to $3.00 a sq ft to clean, sand and seal
Call Now(352) 820-4633

Who seals brick pavers in Mount Dora, and how fast do they answer?

Brick paver sealing is available in Mount Dora, FL, and a local contractor replies within 1 business day, usually much sooner. The estimate is free, and you decide whether to book. To reach one, call (352) 820-4633.

Picture a brick walk that has lost its red under the live oaks, with green in the joints and a pale film along one edge. A gentle wash, new sand and a sealer made for clay bring the warm color back and slow the next round of algae. Show the contractor the edge where it looks worst when you ask for a free Mount Dora estimate.

Call (352) 820-4633

Where around Mount Dora can brick paver sealing be booked?

Brick estimates reach Mount Dora and the nearby towns below, which span Lake, Orange, Sumter, Seminole and Volusia counties. Open a town to read what pavers face there. Missing from the list? Call (352) 820-4633.

Gloved hand sweeping fine sand across a herringbone brick paver surface with a washed half beside a gray half

How is sealing brick pavers different from sealing concrete ones?

Clay brick is porous and takes in water, so the sealer has to let moisture out again. Kennelly Paver and Restoration says brick pavers take water-based sealer only. That narrows the choice, and it is the first thing to ask a contractor about. To compare answers, ask for a free Mount Dora estimate.

Breathable beats thick

A Mount Dora soft wash company describes a breathable, UV-stable sealer and avoids box-store products that trap moisture and cloud over time. Castle Clean and Seal calls water-based the Florida standard for the same reason. Ask for the product name on the quote. Call (352) 820-4633 to raise it.

Three finishes to choose from

Kennelly lists wet look, matte and natural for brick, and Colorburst also offers high gloss. A Mount Dora soft wash company says the protection is equal and the choice is about looks. See a sample on your own brick when you ask for a free Mount Dora estimate.

Coats are counted on the quote

Castle applies 2 to 3 coats of water-based sealer on a standard job. Ask how many coats your quote assumes, and what the label says about the wait between them. Call (352) 820-4633 to ask.

What is the white haze on my brick, and will sealing hide it?

A white film on brick is often efflorescence. Wikipedia explains that water dissolves a salt inside the material, carries it to the surface and leaves it behind as it dries. The primary kind is a white, fluffy deposit that can usually be brushed off, and it is usually an aesthetic matter. To have a patch of haze looked at, ask for a free Mount Dora estimate.

Where the salt comes from

The salts already sit in the material, and a wet spell moves them out. Mount Dora gets near-daily storms from June through September, according to a local soft wash company. A patch that returns after rain points to moisture moving through. Call (352) 820-4633 to describe yours.

Why trapped salt matters

Wikipedia notes that salt blocking the pores can build pressure inside the material and spall brick. A vapor-permeable water repellent lets moisture escape and can reduce the problem, though it cannot prevent it for good. That is another reason a breathable sealer matters. Ask how the contractor handles haze when you ask for a free Mount Dora estimate.

Haze from the sealer itself

A cloudy, white or peeling surface can also mean old sealer has failed, per Colorburst. Sealer put down over damp pavers can turn cloudy and white, a Mount Dora paver page warns. A close look tells the two apart. Call (352) 820-4633 to book one.

Can brick paver walks near older Mount Dora homes be sealed?

Yes, and the age of the house matters. The Mount Dora Historic District joined the National Register on October 1, 2009, and Wikipedia lists its edges at 3rd Avenue, 11th Avenue, Clayton Street and Helen Street. A Mount Dora paver page says older homes can carry unknown past coats. Tell the contractor what you know about the brick when you ask for a free Mount Dora estimate.

A matte finish for porches and cottages

A Mount Dora paver page says a matte finish suits older porches and cottages, and a wet look adds depth but shows scuffs sooner. A brick walk beside a front porch often has both foot traffic and plant litter. Ask for a sample patch by phone at (352) 820-4633.

Find out what is on the brick

Water-based sealer will not bond over a solvent-based coat, the same page warns. A test patch tells a contractor what is there before pricing. To book that test, ask for a free Mount Dora estimate.

Two smiling contractors in work shirts holding a spray wand and a roller handle on a brick toned paver drive before sealing a stucco home

How often should brick pavers be resealed in Mount Dora?

Kennelly puts a coat at two to four years. A Mount Dora soft wash company lists sun-exposed driveways at 2 to 3 years, shaded pool decks and patios at 3 to 5 and heavily shaded walks at 4 to 6. Under the oaks, brick lasts toward the long end. To find where yours falls, call (352) 820-4633.

What the wash in between does

Kennelly recommends a maintenance cleaning every 12 to 15 months. It clears algae and dirt before they sink into porous brick. Ask what the visit costs when you ask for a free Mount Dora estimate.

Reading the surface

Colorburst lists washed-out color, water that soaks in instead of beading and sand washing from the joints as signs that a coat is done. Call (352) 820-4633 if yours soaks in.

What if my brick already has old sealer on it?

A failed coat has to come off before new sealer goes down. Castle lists stripping at $500 to $1,000 or more, and Kennelly lists $3.50 to $5.00 a square foot for a strip and reseal. A Mount Dora company says new sealer over failed sealer fails again. To have the coat judged, ask for a free Mount Dora estimate.

Cloudy, yellowed or peeling

Those are the three looks of a failed coat. A contractor strips to bare brick, treats any salt and starts over. Kennelly says stripping jobs take two to three days against one for a standard job. Plan around that when you call (352) 820-4633.

How it works

What is the brick paver sealing process in Mount Dora?

A brick job follows six steps, and a gentle wash suits porous brick. A Mount Dora company puts the job at one to two days. To book one, call (352) 820-4633.

1. Look over the brick

The contractor measures, marks low spots and checks the surface for old sealer and salt.

2. Wash gently

A low pressure wash lifts algae and dirt without scouring the face of the brick.

3. Refill the joints

Sand goes into every gap, and the extra is swept off.

4. Dry fully

Porous brick holds water, so shaded corners get extra time before sealer goes on.

5. Seal with a breathable product

A water-based sealer goes on in thin, even coats, in the finish you chose from the sample.

6. Walk it with you

The contractor goes over the work with you and leaves the wait times for feet and furniture.

Pricing

What does sealing brick pavers cost in Mount Dora?

Kennelly Paver and Restoration lists a standard clean, sand and seal for brick at $1.50 to $3.00 a square foot, with a typical brick project at $750 to $3,000. Castle Clean and Seal publishes the same $1.50 to $3.00 range for Central Florida and holds a $1,000 project minimum. For a price on your brick, ask for a free Mount Dora estimate.

A strip and reseal runs $3.50 to $5.00 a square foot at Kennelly, and Castle says stripping adds $500 to $1,000 or more. Kennelly calls a quote near $0.40 a square foot a red flag, and one near $10 a sign of an installer instead of a sealing specialist. Holding a quote? Call (352) 820-4633 and set it beside these figures.

Only the green film bothers you? The paver cleaning guide covers a wash with new sand. The service area list names every town reached, and Mount Dora paver sealing is the main page.

Paved areaTypical exampleClean, sand and seal
250 sq ftBrick front walk$375 to $750
450 sq ftBrick courtyard or entry$675 to $1,350
800 sq ftBrick drive$1,200 to $2,400
1,200 sq ftBrick drive plus walk and steps$1,800 to $3,600

Based on the $1.50 to $3.00 a square foot Kennelly Paver and Restoration lists for standard brick sealing, as published in November 2026. Castle Clean and Seal holds a $1,000 project minimum, so small areas can price higher. Your contractor sets the price after seeing the brick.

Get a Free Estimate

Why choose us

Why hire a contractor who knows Mount Dora brick?

Brick in this city sits under live oaks, beside lake water and near older homes, and each of those leaves its own mark. A contractor who works here recognizes the signs and names the sealer on the quote. You make the final call. To ask for a visit, call (352) 820-4633.

Ask for the sealer name

Kennelly lists a vague sealer description and skipped joint sanding as warning signs, and a quote with no in-person look. A written sealer name lets you check the product label. Bring that question when you ask for a free Mount Dora estimate.

Want your Mount Dora brick looking its best again?

Send the short form or call, and a local contractor replies inside 1 business day, often far sooner.

Call (352) 820-4633

Free, no obligation

Photos

What does sealed brick look like around Mount Dora?

Sealed herringbone paver driveway leading to a craftsman bungalow under a live oak for Mount Dora brick work
Family on lounge chairs by a sealed paver pool deck in a screened lanai for Mount Dora brick work
Sealed brick paver patio with a white pergola and bistro set under hanging moss for Mount Dora brick work
Sealed brick paver walkway to a yellow Victorian porch with a picket fence for Mount Dora brick work
Close view of older brick pavers after sealing for Mount Dora brick work
Shaded paver patio with one cleaned half beside a mossy half for Mount Dora brick work
Contractor using a surface cleaner on a brick paver driveway for Mount Dora brick work
Two contractors sealing a paver driveway at a ranch home for Mount Dora brick work
Questions

Frequently Asked Questions

What do professionals use to seal brick pavers?

Kennelly Paver and Restoration says brick pavers take water-based sealer only, in a wet look, matte or natural finish. Castle Clean and Seal calls water-based the Florida standard because it lets moisture escape, and warns that solvent-based products can turn white and peel.

What happens if brick pavers are not sealed?

They fade in the sun, lose joint sand to the rain and grow algae in the damp. Kennelly counts more than 50 inches of rain a year in the Orlando area. A Mount Dora page adds that sealing slows damage without curing it, so unsealed brick needs more washing and more sand.

Should I clean brick pavers before they are sealed?

Yes. A Mount Dora company page describes a low pressure wash and full drying before any sand or sealer goes down. Sealer over a dirty or wet surface locks in the grime or turns cloudy and white.

Is it worth it to seal pavers?

For brick, usually. Colorburst lists protection from sun fade, help against oil stains, held joint sand and easier cleaning. Kennelly says a coat lasts two to four years, so the cost repeats on that schedule.

How much does it cost to seal brick pavers in Mount Dora?

Kennelly lists a standard clean, sand and seal at $1.50 to $3.00 a square foot, with a typical brick job at $750 to $3,000. Castle adds a $1,000 project minimum. A strip and reseal runs $3.50 to $5.00 a square foot at Kennelly.

Why does my brick have a white haze after rain?

It may be efflorescence. Wikipedia explains that water carries a dissolved salt to the surface, where it dries as a white deposit, and that the primary kind is usually cosmetic and brushes off. A cloudy film can also be failed sealer, so ask a contractor to look before treating it.

Can old sealer on brick be sealed over?

Not if it has failed. Castle lists stripping at $500 to $1,000 or more, and one Mount Dora page says water-based sealer will not work over a solvent-based coat. Sealing over a peeling coat tends to peel again.

Should brick paver sealing be a wet look or a natural finish in Mount Dora?

It is a matter of taste. A Mount Dora soft wash company says both finishes protect equally, and a Mount Dora paver page says matte suits older porches while a wet look shows scuffs sooner. Ask for a sample on your own brick.

How long does paver sealing last in Florida on brick in Mount Dora?

Two to four years is the range Kennelly Paver and Restoration gives for Central Florida. Brick in full sun along a Mount Dora street sits near the short end, and brick under the oaks reaches toward the long end. A wash every 12 to 15 months helps the coat hold on.

Does a brick paver driveway in Mount Dora need to be sealed?

It is the usual advice. Kennelly counts more than 50 inches of rain a year in the Orlando area, and a Mount Dora paver page says rain on the plateau carries joint sand downhill. A coat and fresh sand keep more of the brick's color and sand in place, though neither lasts forever.

Should brick pavers be sealed after a power wash in Mount Dora?

Usually, once the brick is fully dry and the joints are refilled. Kennelly describes the standard order as pressure cleaning, joint re-sanding and then water-based sealer. Sealing right after a wash, on damp brick, can turn the coat cloudy and white.

How often does brick in a shady Mount Dora yard need resealing?

Less often than brick in full sun. A Mount Dora company lists shaded patios and pool decks at 3 to 5 years and heavily shaded walks at 4 to 6, while Kennelly gives two to four years overall.

Ask a local contractor about your brick

Describe the brick and any haze, and a reply reaches you within 1 business day, usually much sooner.

Call (352) 820-4633

Free, no obligation